Chris Reeve

Green Beret-5.5 inch

Green Beret-5.5 inch Chris Reeve Knife

Efficient – Tough – Exceptional

Words that describe the men of the U.S. Army Special Forces

Words that describe the knife designed specifically for these men.

Designed and made specifically for the US Army Special Forces, this knife is known to The Green Beret as "The Yarborough" and to everyone else as "The Green Beret Knife". It is a no-nonsense, hardworking tool, designed by renowned knife maker and designer, Bill Harsey, with function and manufacturing input from Chris Reeve.

Made in Boise, Idaho by Chris Reeve Knives, The Green Beret Knife is a using knife that, just like the men for whom it was designed, is efficient, tough, and uncompromising.

• Blade Material - CPM S30V Stainless Steel

• Blade Hardness - 55-57 RC

• Blade Finish - KG Gun-Kote™

• Blade Length - 5.5"(139mm)

• Blade Thickness (full tang) - 0.220" (5.6mm)

• Overall Length - 10.875" (276mm)

• Handle Material - Sandblasted Black Canvas Micarta

• Weight - 11.8oz (335g)

• Sheath - Foliage green Combat Master by SpecOps Brand™ (not shown)

Green Beret-5.5 inch Chris Reeve Knife

Green Beret-7 inch

Green Beret-7 inch Chris Reeve Knife

Efficient – Tough – Exceptional

Words that describe the men of the U.S. Army Special Forces

Words that describe the knife designed specifically for these men.

Designed and made specifically for the US Army Special Forces, this knife is known to The Green Beret as "The Yarborough" and to everyone else as "The Green Beret Knife". It is a no-nonsense, hardworking tool, designed by renowned knife maker and designer, Bill Harsey, with function and manufacturing input from Chris Reeve.

Made in Boise, Idaho by Chris Reeve Knives, The Green Beret Knife is a using knife that, just like the men for whom it was designed, is efficient, tough, and uncompromising.

• Blade Material - CPM S30V Stainless Steel

• Blade Hardness - 55-57 RC

• Blade Finish - KG Gun-Kote™

• Blade Length - 7.0"(139mm)

• Blade Thickness (full tang) - 0.220" (5.6mm)

• Overall Length - 12.375" (276mm)

• Handle Material - Sandblasted Black Canvas Micarta

• Weight - 12.8oz (335g)

• Sheath - Foliage green Combat Master by SpecOps Brand™ (not shown)

Green Beret-7 inch Chris Reeve Knife

Mountaineer I

Mountaineer I Chris Reeve Knife

With the swedge ground back to create a classic Bowie clip point, these are exceptionally practical knives, suitable for back packing, hiking or camping. The high grind offers a sleek blade for food preparation in camp, a sharp point for opening cans and a sturdy tool for whittling. The single cross guard allows a thumb forward position, and serrations are provided to prevent the thumb from slipping.

• Blade Material - A2 Tool Steel

• Blade Hardness - 55-57 RC

• Blade Finish - KG Gun-Kote™

• Butt Cap – 6061 Aluminum Fitted with a Neoprene ‘O’ Ring

• Blade Length - 4" (101 mm)

• Overall Length - 8" (203mm)

• Blade Thickness - 0.177" (4.5 mm)

• Weight - 5.5 oz. (156 g)

• Sheath - 4" Wraparound

• One Piece Range - Click here for more Info.

Mountaineer I Chris Reeve Knife

Project I

Project I Chris Reeve Knife

The Project I with a spear point blade was designed in conjunction with Sgt. Karl Lippard USMC and author of "The Warrior". The concept was to fulfill all the features that Sgt. Lippard felt were vital for a knife carried by a Marine

• Blade Material - A2 Tool Steel

• Blade Hardness - 55-57 RC

• Blade Finish - KG Gun-Kote ™

• Butt Cap – 6061 Aluminum Fitted with a Neoprene ‘O’ Ring

• Blade Length - 7.5" (191 mm)

• Overall Length - 12.75" (324mm)

• Blade Thickness - 0.255" (6.5 mm)

• Weight - 14 oz. (397 g)

• Sheath - 7.5" Snap

• One Piece Range - Click here for more Info.

Project I Chris Reeve Knife

Skinner (Ubejane)

Skinner Chris Reeve Knife

"…After many years of listening to hunters (both in the USA and in Africa) telling me what the ideal skinner should be and be able to do, I was totally confused. I am not a hunter and have never skinned an animal. However after many years as a knife maker, I have a good idea of what a tool should do and how it should be handled. My Skinner may be a little unconventional but I designed it to cover a wide range of tasks relating to skinning, as well as chores around camp. The cutting edge is rugged enough to take a lot of punishment but, properly sharpened, it will do the most delicate cutting tasks.
The name that I like for the Skinner is "Ubejane" which means Rhinoceros in Zulu. The Rhino is a large, powerful animal with a strong up-tilting horn – my skinner echoes these attributes!" – Chris Reeves.

The leather sheath has a strap closure that passes from left to right around the cross guard. To ensure that the knife does not fall from the sheath should the snap loosen, there is a nylon stud in place above the cross guard on the right hand side.

• Blade Material - A2 Tool Steel

• Blade Hardness - 55-57 RC

• Blade Finish - KG Gun-Kote™

• Butt Cap – 6061 Aluminum Fitted with a Neoprene ‘O’ Ring

• Blade Length - 4.5" (114 mm)

• Overall Length - 9.5" (241mm)

• Blade Thickness - 0.177" (4.5 mm)

• Weight - 11.5 oz. (326 g)

• Sheath - 4.5" Snap

• One Piece Range - Click here for more Info.

Skinner Chris Reeve Knife

Warrior

Warrior Chris Reeve Knife

The Neil Roberts Warrior Knife is dedicated to the memory of Petty Officer First Class Neil Roberts, killed in action during Operation Anaconda, Afghanistan 2002, and the first SEAL to lose his life in action since 1989. The SEAL community and all involved with this project honor his sacrifice. Commissioned by retired Navy Chief Steven C. Bronson and designed by Bill Harsey with input from Chris Reeve, the Warrior knife is manufactured to the uncompromising standards for which Chris Reeve Knives is known worldwide.

The engraving on each knife reads "Neil Roberts BUD/S Class 184" – for the uninitiated BUD/S stands for Basic Underwater Demolition/SEAL.

A trust fund at the Navy Federal Credit Union has been established to support the education of Neil Robert’s son, Nathan. The price of each knife includes a $20.00 contribution to this fund.

• Blade Material - CPM S30V Stainless Steel

• Blade Hardness - 55-57 RC

• Blade Finish - KG Gun-Kote™

• Blade Length - 6" (152.4mm)

• Blade Thickness (full tang) - 0.220" (5.6mm)

• Overall Length - 11" (279.4mm)

• Handle Material - Sandblasted Black Canvas Micarta

• Screws - Stainless Steel Coated with KG Gun-Kote™

• Weight - 12.3oz. (349g)

• Sheath - Tan Combat Master by SpecOps Brand™

Warrior Chris Reeve Knife

Pacific

Pacific Chris Reeve Knife

Continuing the proud tradition of Chris Reeve Knives honoring elite military, the Reeve/Harsey collaboration - the Pacific - is the civilian version of a knife created to celebrate the 50th Anniversary of 1st Special Forces Group. Based in Ft. Lewis, WA, 1st Group's theatre of operations is Asia and the Pacific, so the name Pacific has been chosen to honor the home and work place of these fine soldiers.

Double row of serrations, on both sides of the blade, provides extremely aggressive cutting of fibrous material.

Glass breaker at the back of the handle is convenient and effective in an emergency.

Grooves in the Micarta, mirrored on the tang, give extra grip, especially for gloved hands.

• Blade Material - CPM S30V Stainless Steel

• Blade Hardness - 55-57 RC

• Blade Finish - KG Gun-Kote™

• Blade Length - 6" (152.4mm)

• Blade Thickness (full tang) - 0.220" (5.6mm)

• Overall Length - 11.5" (292mm)

• Handle Material - Sandblasted Black Canvas Micarta

• Screws - Stainless Steel Coated with KG Gun-Kote™

• Weight - 11.6oz. (329g)

• Sheath - ACU Combat Master by SpecOps Brand™

Pacific Chris Reeve Knife

Professional Soldier

Professional Soldier Chris Reeve Knife

This collaboration with designer Bill Harsey was created at the request of the owners of www.professionalsoldiers.com, a discussion forum for active duty and retired Special Forces soldiers. We are proud to continue the tradition of honoring the elite military and, in this knife, we offer a discreet, no-nonsense tool.

The central cutaway reduces weight and doubles as a shackle wrench, accommodating up to a 5/8th inch shackle.

The frame style knife fits snugly into a slim Kydex sheath so it is readily accessible, whether tucked into a cargo pocket or attached to a MOLLE vest.

A 36 inch nylon lanyard is threaded through holes in the handle and tied in such a way that the sound of the knife being laid on a hard surface will be muffled.

• Blade Material - CPM S30V Stainless Steel

• Blade Hardness - 55-57 RC

• Blade Finish - KG Gun-Kote™

• Blade Length - 3.375" (86mm)

• Blade Thickness (full tang) - 0.165" (4.1mm)

• Overall Length - 7.5" (184mm)

• Weight - 3oz. (385g)

• Sheath - Kydex made by Blade Tech

Professional Soldier Chris Reeve Knife